Embedded Files
Post date: May 03, 2016 12:37:18 PM
In this guide we will go through the settings for the Matrox cards within the Bierkeller Installation.
The premise is that there is 3 projectors in a row,, but in order to manage the bezels between the projectors, they need to be seen by the system as one input
First, Open up the Matrox PowerDesk software
Click on Multi-Display Setup
OK, there is a chance it is already set up correctly, if it is, it will look like this...
The Resolution of each display should be set to 1280x768, There should be 3 seperate displays joined together horizontally.
The save faffing we have cloned the 3rd output to both the 3rd output and the 4th output. (allows basic testing etc)
If it isn’t setup correctly from the offset…
You need to go to basic configurations -> Use Stretched Mode
The select the Stretched 3x1 Configuration.
You’ll notice that the 4th output is sat in unused.
All you need to do is click and drag the 4th output on top of the 3rd, and it will look like this:
OK, so now we’re happy, it makes sense to save it as a favourite...
Then click ok when you are happy.
Once you have done this, there is a good chance you will have to change the bezels etc and do the more advanced setup, for that guide click here
Page updated
Report abuse